cnc laser cutting machine metal

1,Beam transmission system: USA II-VI 2,Spanish FAGOR 8070 controller 3,O2, N2 and air auto-exchange system

Technical Parameters:

Stroke
X-axle	4000mm/6000mm/8000mm
Y-axle	2000mm
Z-axle	100mm
Speed
X-axle	100m/minute
Y-axle	100m/minute
Z-axle	50m/minute
Precision
X-axle positioning precision	±0.03mm/m
Repositioning precision	±0.02mm
Y-axle positioning precision	±0.03mm/m
Repositioning precision	±0.01mm
Acceleration	X,Y axle 1.5g
Power of the CO2 laser	1500W~6000W
Power of fiber laser	500W~4000W

  

MAIN FEATURES:

1, Adopt the most advanced third generation of hanging gantry flying optics structure. The gantry moves with the centralized drive. The precision is high.

2, The difference error caused by double drive has been completely solved. The precision is stable.

3, The transmission parts adopts précised rack and pinion. The speed is fast.

4, Adopts the high performance aluminum magnesium alloy hanging cross beam. The weight is light, so the speed acceleration is high.

5, Adopt U axle beam compensation technology to make sure the beam diameter stable in area.

6, Adopt centralized lubricating device controlled by control system to automatically lubricate the transmission parts so that the living lives and the precision of the transmission parts are protected.

Double focusing cutting head make it easier to replace mirrors. It helps you save time for replacing mirrors.

      

Equipped with section duster to improve the working environment

The hanging gantry beam structure use central drive which avoided the problem of synchronization error of double drives. The operator can get close to the machine and load or unload from X axis directions

German ROFIN DC025 laser: This laser CO2 slablaser. It has the following features; good beam mode makes cutting good quality and high efficiency. The gas consumption is only 0.2L/hour. A bottle of special gas can run 7200 hours. No turbine in the laser  which makes the machine  stable.

cnc laser cutting machine metal